Version 1.03 1.Fixed the burrs which displayed on the waveforms 2.Fixed the waveform displaying issue for 4CH models 3.Improved the boundary processing for waveform interpretation 4.Fixed the system crash issue when the random measurement functions executed 5.Improved the mathematical operation 6.Added limitations for autoset, cursor and measurement function modules (EDU_LKModule.fun). This module can not used for V1.02 Version 1.04 ~ 1.05 skipped no release Version 1.06 1.Fixed the minor bug for search operation 2.Fixed the operation issue when the roll mode stopped 3.Reduced the noise level when the 1mv/div or 2mv/div vertical range performed Version 1.12 1.Fixed the 1k memory length issue when the STOP function operated. 2.Fixed period of the enable time for SPC operation (at least 30 minutes operating time is required) Version 1.17 1.Fixed the Japanese displaying issue 2.Fixed the auto measurement bug which may cause the system crash 3.Fixed the displaying issue of XY mode under certain circumstances Version 1.18 1.Fixed the remote command for the trigger delay source 2.Fixed the displaying issue when the FFT function executed under the Roll mode Version 1.20 1.Added :math:memory? remote control command in order to catch the math waveform data. 2.Fixed the waveform data were not matched randomly for both operations of CH1 of save waveform & all displayed functions. 3.Fixed the Ethernet data displaying bug issue. 4.Fixed the XY mode crash issue. Version 1.23 (skipped no release) 1.Fixed the CAN bus decoder bug 2.Improved the frequency measurement stability 3.Fixed the average mode operation issue when ZOOM enabled 4.Fixed the Pictbridge malfunction 5.Added the new function that the FFT and sampling waveform can be displayed separately (enabled by Function module) Version 1.24 1.Fixed the waveform jitter for the "Average mode" when the interpolation sampling enabled Version 1.25 1.Added UART, CAN, LIN baud rate settings 2.Add Multilanguage: Spanish & French 3.Fixed SPI setup crash issue 4.Fixed the random crash issue when the Event Table was expanded Version 1.26 1.Added new ¡§band pass type¡¨ item for the ¡§Digital Filter type¡¨ function. 2.Fixed the trigger level offset issue, if the vertical position was shifted out off the screen range. 3.Fixed the BUS waveform position not normal offset. 4.Fixed the ¡§Advance math¡¨ algorithm which caused the system crash. Version 1.27 1.Added USBDelay command in order to solve the USB data leaks for WIN10. 2.Fixed the zoom state malfunction for horizontal position command. 3.Fixed issue where the self-definition of MASK points would not be continued and slow the system responds. 4.Changed the value range of trigger hold off command: the minimum value changed to 4ns from 10ns. Version 1.28 1.Removed the extra unwanted carriage returns symbol for *LRN? command 2.Fixed the bus decode malfunction: under high baud rate of 1M memory 3.Fixed the bus decode malfunction: under LA signal of 10M memory (for MSO2000E series) Version 1.30 1.Fixed the starting condition of autotrigger for Datalog function. 2.Extended the "Duration" until the 999 hours for Datalog function. 3.Added FFT standalone mode.(need function module) 4.Added time information into segment measurement save CSV file. Version 1.31 1.Bug Fixes for the Max Hold, Min Hold of spectrum analyzer. 2.Added a demo mode (Frequency sweep (linear) ) for spectrum analyzer. 3.Updated the Japanese language for the Mask function. Version 1.32 1.Fixed the waveform displaying issue when the "Detection" of Spectrum Analyzer function changes the "Manual" tag to "Average". 2.Updated the Japanese translations for the AWG menu. Version 1.34 1.Added a new ¡§Frequency Response Analyzer¡¨ APP function which can be downloaded from our website. (This APP only available for MSO-2000EA & MDO-2000E series) 2.Updated the Japanese menu tree translations for SA function. 3.Updated the Japanese menu tree translations for digital filter function. 4.Updated the simplified Chinese menu tree translations for some functions. 5.Updated the Russian menu tree translations for DMM function. 6.Fixed the EVENT table display and storage error issue for UART bus decoding. 7.Fixed the window zoom display issue for I2C bus decoding. 8.Fixed the I2C bus decoding error. 9.Fixed the type of executable for DEMO function. 10.Fixed the return value of SA:MEMory SCPI command. 11.Fixed the return value of :D:MEMory and :DIGital:MEMory SCPI command. 12.Fixed the setting value of TRIG:DEL:LEV SCPI command. 13.The digital filter function can be implemented now after the SEGMENT data caught. 14.The firmware upgrade procedure is now ONLY support the ¡§Safe mode¡¨ firmware upgrading from this firmware version. Version 1.35 1.Added FRA function menu tree in simplified Chinese. 2.Added FRA function menu tree in Russian. 3.Added FRA function menu tree in Spanish. 4.The CSV format is now supported for AWG ¡¥s Arbitrary Waveform editing which format can only cooperated with the ¡§AFG Arbitrary Waveform PC Software¡¨ 5.Fixed the REF waveform operating issue of interpolation mode for math function. 6.Revised the storage results of average waveform for interpolation mode 7.Fixed the system locks up when the multilingual menu was setting in non-English and the ¡§HARDCOPY¡¨ button pressed. 8.Fixed the Go/NoGo Execute SCPI Command settings issue. Version 1.36 1.Fixed the Spanish translations. 2.The CSV format in small letter can be read by AWG¡¦s arbitrary waveform function now. 3.Fixed the cursor marker for the optional FRA function. 4.Fixed the cursor operation which may unable to reactivated within the ¡§zoom¡¨ status. 5.Fixed the Go/NoGo information column which mask off by others column. 6.Adjusted the range adjustment behavior within the ¡§Go/NoGo¡¨ status. 7.Fixed the display of ¡§Ratio¡¨ counter which cannot clear completely under non-English Multi-language circumstances. 8.Fixed the specific average number order which cannot be saved as settings file. 9.Adjusted the initial settings for the AWG¡¦s arbitrary waveform function. 10.Fixed the remote control command of BUS1:UART:TX:SOURce 11.Fixed the remote control command of BUS1:UART:RX:SOURce 12.Added the remote control command of BUS1:UART:POLARity 13.Fixed the execution action of low frequency signal for the ¡§Datalog¡¨ function. Version 1.37 1.Fixed the crash issue for the "bus decode" function 2.Fixed the "peak table" data storage issue for the SA mode. 3.Added the new "SA:LIST? SCPI" command. 4.Changed the data transmission format of "SEGMents:MEASure:TABle:LIST?" (SCPI command) to the "block data" transmission format. 5.Changed the data transmission format of " LISTer:DATA?" ( SCPI command) to the "block data" transmission format. 6.Improved the measurement high-low(histogram) calculation method. 7.Fixed the correspondence problem of frequency value for the Math FFT Detail CSV of "Save All Waveform" function.